In recent years, with the rapid development of the high-speed rail era, the use of smart ticket checking machines has become more and more common. Smart ticket checking machines are an important part of the automatic ticket checking system. The traditional ticket checking method is to enter the venue through manual ticket checking, which is very efficient. Very low. The emergence of intelligent ticket checking machinery not only reduces the work intensity of ticket checking personnel, but also improves efficiency. It is very convenient and fast to use! The high-speed rail ticket gate machine belt is mainly used in the ticket transmission system of the intelligent ticket gate machine. It only takes less than 2 seconds to process a ticket!
The working principle is:
Behind the slot of the smart ticket gate machine, there is a mini electric motor that rotates 6,000 times per minute. The electric motor drives 7 sturdy PVC wheels and 2 high-speed rail ticket machine belts. The belts rotate at about half a meter per second. Transfer the ticket at high speed, and then check it through the magnetic card reader. If the ticket can still be used, the machine will transport the ticket to the card slot and return it to you!
High-speed rail ticket gate machine belts can be made into the following two types:
1. Pure rubber seamless flat belt for high-speed rail ticket gate machine belt
It is produced using a mold-integrated vulcanization molding process. It is seamless and has no interfaces, and has no structural defects like bonded belts. It reduces vibration during operation, achieves high rotation accuracy, and ensures complete power transmission! The belt body is made of pure rubber material, which is evenly polished and has a fine texture. It has good telescopic performance, wear resistance and bending fatigue resistance. It is light, thin and powerful, soft and wear-resistant, has low noise, and can run very evenly and quietly!
2. MXL polyurethane Synchronous Belt for high-speed rail ticket gate machine belt Made of seamless thermoplastic polyurethane material, it has high wear resistance; the middle layer uses glass fiber cord core as the strong layer to enhance the strength and tensile strength of the belt, so that the belt has good dimensional stability and production tolerance Small, the accuracy of thickness and length can be guaranteed! Use the lightest trapezoidal gear - MXL type, precision transmission, no slip, high efficiency! Commonly used specifications are B70MXL/B150MXL/400 double-sided teeth/500 double-sided teeth...
Jiangsu Bailite Transmission Technology Co., Ltd
